DIMENSIONAL DRAWINGS FOR
3/4"-1" MNPT Inline, Immersion & Submersion Ion Selective Model 6XX0 Series ISE Sensors
1"-1.25" MNPT Immersion & Submersion Model AB 6100 Special Fluoride Ion Selective (ISE) Sensor
1" MNPT Twist Lock Quick Disconnect Bayonet Style Ion Selective Model 8XX0 Series ISE Sensors
Sanitary & HOT-TAP Valve Retractable Style Ion Selective Model 5XX0 Series ISE Sensors
3/4"-1" MNPT INLINE, IMMERSION & SUBMERSIBLE |
1"-1.25" MNPT IMMERSION & SUBMERSIBLE |
3/4"-1" MNPT Ion Selective (ISE) Sensor 6XX0 Series AB 6100H Fluoride (F-) AB 6410 Ammonium (NH4+)
|
1.00"-1.25" MNPT AB 6100 Special Fluoride Ion Selective (ISE) Sensor AB 6100 Special Fluoride (F-) Ion Selective Sensor is the ONLY MODEL SUITABLE FOR
Inquire to ASTI factory for any fluoride ion measurement to determine if the special AB 6100 is require for your desired field measurement. |
1" MNPT TWIST LOCK QUICK DISCONNECT BAYONET STYLE
|
3/4" MNPT SANITARY & HOT-TAP STYLE
|
1" MNPT Twist Lock Ion Selective (ISE) Sensor 8XX0 Series AB 8100 Fluoride (F-) AB 8410 Ammonium (NH4+)
|
3/4" MNPT Sanitary & HOT-TAP Ion Selective (ISE) Sensor 5XX0 Series AB 5100 Fluoride (F-) AB 5410 Ammonium (NH4+)
|
Installation Details for 1"MNPT KYNAR® PVDF and KETASPIRE® PEEK Twist Lock Receptacles for Quick Disconnect Bayonet Inline Use
The dimensional detail drawing for the KYNAR® PVDF and KETASPIRE® PEEK Twist Lock Receptacles is linked below: 1"MNPT Twist Lock Receptacle in KYNAR® PVDF or KETASPIRE® PEEK Material of Construction
Please carefully check the recommend maximum temperature and pressure rating of your twist lock sensor prior to installation. Note that the max temperature pressure will be limited by the ion selective sensor selected rather than the capabilities of the 1"MNPT KYNAR® PVDF and KETASPIRE® PEEK Twist Lock Receptacle twist lock quick disconnect bayonet receptacle process fitting. |
Chemical Resistance Charts for Materials of Construction of Ion Selective Sensor Bodies &
1"MNPT Twist Lock Receptacles for Bayonet Style Quick Disconnect Inline Installations
6XX0, 8XX0 & 5XX0 Series Ion Selective (ISE) Sensors Body Housing RADEL® Poly-Phenyl-Sulfone, PPSU |
KETAPSIRE® 1"MNPT Twist Lock Receptacles Poly-Ether-Ether-Ketone, PEEK |
KYNAR®for 1" MNPT Twist Lock Receptacles & Selected Special Order Junction Configurations (Poly-Vinylidene-Fluoride, PVDF) HDPE (High-Density Polyethylene) is employed for most support matrix for solid-state conductive polymer reference systems in ISE sensors |
®
RADEL and KETASPIRE are registered trademarks of SOLVAY
® KYNAR is a registered trademarks of ARKEMA